Cabletec is a specialist manufacturer of high performance metal braid and earth bonding leads designed and approved for aerospace, defence and industrial applications. http://www.cabletec.com Cabletec have been approved of Airbus bonding leads http://www.cabletec.com/cabletec%20information.html HBT99 is a premium screening product providing exceptional protection for wire and cable harnesses from electromagnetic interference (EMI). HBT99 is available in tin plated and nickel plated copper and provides optical coverage of between 96% and 99%. It is supplied on a former to maintain its round form and to aid its application and is recommended for wire systems demanding higher levels of protection from EMI. http://www.cabletec.com/Products/METAL%20BRAID/cabletec%20HBT99%20Screening%20Braid.html PTFE equipment wire and cable exhibits superior high temperature performance and excellent resistance to organic fluids, acids and chemicals. Its thin-wall construction is the result of the exceptional properties of PTFE and as such offers space and weight savings in high-density wiring and circuitry. Cabletec’s PTFE wire is available as a custom specified multicore cable and is available pre-etched to aid encapsulation. PTFE wire and cable is widely used in industrial, aerospace, military and commercial electronics. http://www.cabletec.com/Products/WIRE%20CABLE/cabletec%20PTEE%20BS%203G210.html ATUM is a premium grade, adhesive lined heat-shrink tubing designed to provide environmental protection and strain relief for wire harnesses, electrical components and cable jackets. ATUM has a wide temperature range and is tough enough for the stringent demands of military and industrial applications. ATUM is available in both 3:1 and 4:1 shrink-ratios and as such covers a wide range of diameters. http://www.cabletec.com/Products/HEAT%20SHRINK%20TUBING/cabletec%20ATUM.html CGPT is a tough, flexible, general purpose, thin-wall heat-shrink tubing with good resistance to common fluids and solvents and a high dielectric strength. It is ideal for the mechanical protection and electrical installation of cables and components in commercial applications. http://www.cabletec.com/Products/HEAT%20SHRINK%20TUBING/cabletec%20CGPT.html Versafit is a highly flame retarded, very flexible heat-shrink tubing designed to meet the stringent requirements of UL224 VW-1 and CSA-OFT. It is ideal for very flexible, lightweight harnesses which require the highest level of flame retardancy. Versafit is often used in commercial electronics and telecommunication systems.Versafit has a low shrink temperature reducing installation time and the risk of damage to temperature sensitive components. http://www.cabletec.com/Products/HEAT%20SHRINK%20TUBING/cabletec%20Versafit.html Roundit 2000 FR is a wrap-around braided sleeving manufactured from flame-retarded polyester monofilaments and texturised flame retarded polyester multifilaments.The self-wrapping feature of Roundit 2000 FR allows for quick and easy installation and removal of the product for assembly and maintenance. Roundit 2000 FR is zero-halogen and provides excellent cut-through and abrasion resistance. Roundit FR is particularly suitable for mass-transit, marine and off-shore applications. http://www.cabletec.com/Products/POLYMERIC%20BRAIDS/cabletec%20Roundit%202000FR.html HT-SCE heat-shrink markers are specifically designed for high temperature applications or where extreme resistance to fuels, lubricants or cleaning solvents is required. HT-SCE markers have very low vacuum out-gassing properties and as such are ideal for use on-board satellites. They are extremely tough and abrasion resistant and are very highly flame retarded. HT-SCE markers are fully compatible with the System Six range of printers and WinTotal software. http://www.cabletec.com/Products/IDENTIFICATION/cabletec%20HT-SCE.html CWT SolderSleeves are designed for use in commercial electronics and low-temperature applications (up to 125C). CWT heat-shrinkable wire and cable interconnection devices are a labour-saving alternative to conventional wire and cable termination methods such as craftsensitive and time-consuming hand soldering or crimping. They insulate, strain relieve and protect terminations from environmental damage in a wide range of applications. http://www.cabletec.com/Products/HARNESS%20COMPONENTS/cabletec%20CWT%20Solder%20Sleeves.html CG003 standard conduit is designed to protect wire and cable in the most hazardous and demanding applications. It is tough, chemically inert, has a very wide operating temperature range and yet is light in weight compared to metallic conduit systems. CG003 conduit is Panavia approved and is NATO codified. It is tough, chemically inert, has a very wide operating temperature range and yet is light in weight compared to metallic conduit systems. CG003 conduit is Panavia approved and is NATO codified. http://www.cabletec.com/Products/PTEE%20CONDUIT/cabletec%20CG003%20Standard%20Wall.html Power shunts are large cross-sectional area braided connectors, customised and designed to meet the increasing demands of power distribution applications. They are often designed with multi-layers of flat or round braids to achieve sizes of up to 1000mm2 and to carry currents in excess of 400 amps. Used as an alternative to solid bus bars and power cable assemblies, power shunts are capable of carrying very high currents yet are flexible, robust, easy to install and cost effective. http://www.cabletec.com/Products/METAL%20BRAID/cabletec%20Power%20Shunts.html